Fluorescence Properties Research Articles

3D microscaffolds with triple-marker sensitive nanoprobes for studying fatty liver disease in vitro.

Non-alcoholic fatty liver disease (NAFLD) is a heterogeneous condition that encompasses a wide range of liver diseases that progresses from simple hepatic steatosis to the life-threatening state of cirrhosis. However, due to the heterogeneity of this disease, comprehensive analysis of several physicochemical and biological factors that drive its progression is necessary. Therefore, an in vitro platform is required that would enable real-time monitoring of these changes to better understand the progression of these diseases. The earliest stage of NAFLD, i.e. hepatic steatosis, is characterised by triglyceride accumulation in the form of lipid vacuoles in the cytosol of hepatocytes. This fatty acid accumulation is usually accompanied by hepatic inflammation, leading to tissue acidification and dysregulated expression of certain proteases such as matrix metalloproteinases (MMPs). Taking cues from the biological parameters of the disease, we report here a 3D in vitro GelMA/alginate microscaffold platform encapsulating a triple-marker (pH, MMP-3 and MMP-9) sensitive fluorescent nanoprobe for monitoring, and hence, distinguishing the fatty liver disease (hepatic steatosis) from healthy livers on the basis of pH change and MMP expression. The nanoprobe consists of a carbon nanoparticle (CNP) core, which exhibits intrinsic pH-dependent fluorescence properties, decorated either with an MMP-3 (NpMMP3) or MMP-9 (NpMMP9) sensitive peptide substrate. These peptide substrates are flanked with a fluorophore-quencher pair that separates on enzymatic cleavage, resulting in fluorescence emission. The cocktail of these nanoprobes generated multiple fluorescence signals corresponding to slightly acidic pH (blue) and overexpression of MMP-3 (green) and MMP-9 (red) enzymes in a 3D in vitro fatty liver model, whereas no/negligible fluorescence signals were observed in a healthy liver model. Moreover, this platform enabled us to mimic fatty liver disease in a more realistic manner. Therefore, this 3D in vitro platform encapsulating triple-marker sensitive fluorescent nanoprobes would facilitate the monitoring of the changes in pH and MMP expression, thereby enabling us to distinguish a healthy liver from a diseased liver and to study liver disease stages on the basis of these markers.

Tetrazole-functionalized Organoboranes Exhibiting Dynamic Intramolecular N→B-Coordination and Cyanide-selective Anion Binding.

Starting from two different cyano-functionalized organoboranes, we demonstrate that 1,3-dipolar [3+2] azide-nitrile cycloaddition can serve to generate libraries of alkyl-tetrazole-functionalized compounds capable of intramolecular NàB-Lewis adduct formation. Due to the relatively low basicity of tetrazoles, structures can be generated that exhibit weak and labile NàB-coordination. The reaction furnishes 1- and 2-alkylated regio-isomers that exhibit different effective Lewis-acidities at the boron centers, and vary in their optical absorption and fluorescence properties. Indeed, we identified derivatives capable of selectively binding cyanide over fluoride, as confirmed by 11B NMR. This finding demonstrates the potentialities of this synthetic strategy to systematically fine-tune the properties of lead structures that are of interest as chemical sensors.

SYNTHESIS OF NEW BODIPY HYDRAZIDE FLUORESCENT PROBES FOR THE DETECTION OF CARBONYLATED PROTEINS GENERATED BY OXIDATIVE STRESS.

Oxidative stress is a cellular disorder implicated in various severe diseases and redox biology and represents an important field of research for the last decades. One of the major consequences of oxidative stress is the carbonylation of proteins, which is also a reliable marker to assess protein oxidative modifications. Accumulation of carbonylated proteins has been associated with aging and age-related diseases and can ultimately causes cell death. Detection of these oxidative modifications is essential to understand and discover new treatments against oxidative stress. We describe the design and the synthetic pathway of new BODIPY fluorescent probes functionalized with hydrazide function for protein carbonyl labeling to improve existing methodologies such as 2D-Oxi electrophoresis. Hydrazide BODIPY analogues show very good fluorescent properties such as NIR emission up to 633 nm and quantum yield up to 0.88. These new probes were validated for the detection and quantification of carbonylated proteins with 2D-Oxi electrophoresis using mouse muscle protein extracts, as well as both flow cytometry and microscopy using oxidant stressed C2C12 cells.

Dual-channel fluorescent sensors based on chitosan-coated Mn-doped ZnS micromaterials to detect ampicillin

The global threat of antibiotic resistance has increased the importance of the detection of antibiotics. Conventional methods to detect antibiotics are time-consuming and require expensive specialized equipment. Here, we present a simple and rapid biosensor for detecting ampicillin, a commonly used antibiotic. Our method is based on the fluorescent properties of chitosan-coated Mn-doped ZnS micromaterials combined with the β-lactamase enzyme. The biosensors exhibited the highest sensitivity in a linear working range of 13.1–72.2 pM with a limit of detection of 8.24 pM in deionized water. In addition, due to the biological specificity of β-lactamase, the proposed sensors have demonstrated high selectivity over penicillin, tetracycline, and glucose through the enhancing and quenching effects at wavelengths of 510 nm and 614 nm, respectively. These proposed sensors also showed promising results when tested in various matrices, including tap water, bottled water, and milk. Our work reports for the first time the cost-effective (Mn:ZnS)Chitosan micromaterial was used for ampicillin detection. The results will facilitate the monitoring of antibiotics in clinical and environmental contexts.

UV imaging for the rapid at-line content determination of different colourless APIs in their tablets with artificial neural networks

This paper presents a novel high-resolution and rapid (50 ms) UV imaging system, which was used for at-line, non-destructive API content determination of tablets. For the experiments, amlodipine and valsartan were selected as two colourless APIs with different UV induced fluorescent properties according to the measured solid fluorescent spectra. Images were captured with a LED-based UV illumination (385–395 nm) of tablets containing amlodipine or valsartan and common tableting excipients. Blue or green colour components from the RGB colour space were extracted from the images and used as an input dataset to execute API content prediction with artificial neural networks. The traditional destructive, solution-based transmission UV measurement was applied as reference method. After the optimization of the number of hidden layer neurons it was found that the relative error of the content prediction was 4.41 % and 3.98 % in the case of amlodipine and valsartan containing tablets respectively. The results open the possibility to use the proposed UV imaging-based system as a rapid, in-line tool for 100 % API content screening in order to greatly improve pharmaceutical quality control and process understanding.

Synthesis and fluorescence properties of a two-dimensional Cd-complex for the ratiometric fluorescence detection of Zn2+ ions

The two-dimensional complex [Cd3(L)(2,2′-bpy)2]n (1) was synthesized solvothermally from 4,5-di(3,5-dicarboxylphenoxy)phthalic acid (H6L) and 2,2′-bipyridine (2,2′-bpy) and fully characterized by elemental analysis, infrared spectroscopy, single crystal and powder X-ray diffraction. Complex 1 displays high stability in water and resistance towards acidic and basic media. Fluorescence studies revealed that it may be acted as a ratiometric fluorescence probe to detect Zn2+ ions in water with a superior detection limit of 3.48 nM. The fluorescence recognition mechanism stems from weak interactions between Zn2+ ions and complex 1. Its pronounced stability and recyclability suggest that the new material may be used for high-precision detection of Zn2+ ions in real-life aqueous samples, even under acidic and basic conditions.

Versatile Aggregation Induced Emissive Molecular Probes Incorporating different Donor/Acceptor groups for Tunable Multiple Color Fluorescence

Excited state intramolecular proton transfer (ESIPT) and aggregation induced emission active multicolour fluorescent probes for bioimaging applications has grown popularly in recent years. Herein, we report a series of different donor/acceptor units (Cl, NO2 and O-CH3) bearing anthracene-salicylaldehyde based fluorescent probes and their antibacterial activity and fluorescence imaging of E. Coli bacteria and zebrafish embryos. All the compounds (ASA1, ASA2, ASA3 and ASA4) synthesized via facile one pot condensation reaction of anthracene hydrazide with Salicylaldehyde, 5-Chlorosalicylaldehyde, 5-Nitrosalicylaldehyde, 5-methoxysalicylaldehyde and characterized using all the possible spectroscopic techniques. The noteworthy tuneable emission wavelength shifts from 471 nm to 625 nm and ESIPT characteristics of the compounds were demonstrated through photophysical experiments and single crystal X-ray diffraction analysis. All the experimental results were completely analysed theoretically on the ground as well as the excited state using density functional theory (DFT) and time dependant density functional theory (TD-DFT) calculations. Compounds ASA1-ASA4 showed fascinating different colour fluorescent (Green, Yellow and Orange) aggregation induced emission features in the THF-H2O mixture. AIE characteristics of ASA1, ASA2, ASA3 and ASA4 were recognized using absorption, emission, fluorescence quantum yield (φ), DLS and SEM analysis. ASA1, ASA2, ASA3 and ASA4 showed excellent antibacterial activity and ROS generation against E. Coli bacteria. Further, owing to the multicolour fluorescent property of the compounds successfully applied for fluorescent imaging in E. Coli bacteria and live zebrafish embryos.

Antibacterial cotton fabric with fluorescent properties based on bismuth-based perovskite quantum dots with silica coating

Antibacterial cotton fabric with fluorescent properties based on bismuth-based perovskite quantum dots with silica coating

Superoxide Dismutase-Mimetic Polyphenol-Based Carbon Dots for Multimodal Bioimaging and Treatment of Atopic Dermatitis.

Polyphenols have been investigated for their potential to mitigate inflammation in the context of atopic dermatitis (AD). In this study, epigallocatechin-3-gallate (EGCG)-based carbon dots (EGCG@CDs) were developed to enhance transdermal penetration, reduce inflammation, recapitulate superoxide dismutase (SOD) activity, and provide antimicrobial effects for AD treatment. The water-soluble EGCG@CDs in a few nanometers size exhibit a negative zeta potential, making them suitable for effective transdermal penetration. The fluorescence properties, including an upconversion effect, make EGCG@CDs suitable imaging probes for both in vitro and in vivo applications. By mimicking the SOD enzyme, EGCG@CDs scavenge reactive oxygen species (ROS) and actively produce hydrogen peroxide through a highly catalytic capability toward the oxygen reduction reaction, resulting in the inhibition of bacterial growth. The enhanced antioxidant properties, high charge mobility, and various functional groups of EGCG@CDs prove effective in reducing intracellular ROS in an in vitro AD model. In the mouse AD model, EGCG@CDs incorporated into a hydrogel actively penetrated the epidermal layer, leading to ROS scavenging, reduced mast cell activation, and histological recovery of skin barriers. This research represents the versatile potential of EGCG@CDs in addressing AD and advancing tissue engineering.

Design and Preparation of Multicolor Long‐Lifetime Fluorescent Material Based on Charge‐Separated States

Design and Preparation of Multicolor Long‐Lifetime Fluorescent Material Based on Charge‐Separated States

Synthesis, structure and mesogenic properties of benzoxazole derivatives

ABSTRACT Two new homologous series of mesogenic compounds, alkanoic acid 4-{[4-(6-chloro-benzooxazol-2-yl)-phenylimino]-methyl}-3-hydroxy-phenyl ester (3a-c) and alkcanoic acid 4-(6-chloro-benzooxazol-2-yl)-3-hydroxy-phenyl ester (5a-b) incorporating benzoxazole heterocyclic have been prepared and FT-IR, NMR, and MS spectrometry have been used to study the molecular structures. The mesogenic behaviour was examined using POM, DSC, and PXRD (variable temperature) techniques. To evaluate its impact on thermal behaviour and mesomorphic properties, the imine linking group of derivatives was modified and investigated. Enantiotropic SmA is observed by the members of Series-I, while those of series-II show monotropic SmA mesomorphism. These compounds were also examined for their absorption and fluorescent properties. The absorption and photoluminescence spectra of compounds 3a-c occurred at 345 nm and 410 nm, whereas in the case of 5a-b occurred at 325 nm and 370 nm respectively. The GAUSSIAN-09 programme has been utilised to perform DFT calculations at B3LYP level for the purpose of obtaining the stable electronic structures of 3a and 5a.

A Naphthalimide based "Turn-ON" probe for wash-free imaging of lipid-droplet in living cells with an excellent selectivity.

The impacts of dimethylation of 4-Amino-1,8- Naphthalimide (ANI) on its photophysical properties are reported. The resulting 4-DiMe-ANI displays completely different fluorescence properties, conferring it ability to selectively label lipid droplets in living cells. A comprehensive photophysical study revealed that this selectivity arises from an Internal Charge Transfer favored in lipophilic media to the detriment of a non-emissive TICT in more polar media. This results in a very high "LDs/Cytosol" signal ratio, enabling LDs to be imaged with an excellent signal-to-noise ratio, and positioning its performance above that of the BODIPY 493/503 commonly used to image LDs.

A Review on Self-Assembly Driven Optoelectronic Properties of Polythiophene-Peptide and Polythiophene-Polymer Conjugates.

Polythiophene (PT) is an important conducting polymer for its outstanding optoelectronic properties. Here, we delineate the self-assembly-driven optoelectronic properties of PT-peptide and PT-polymer conjugates, taking examples from recent literature reports. PT-peptide conjugates made by both covalent and noncovalent approaches are discussed. Poly(3-thiophene acetic acid) (P3TAA) covalently coupled with Gly-Gly-His tripeptide, C-protected and deprotected tripeptide H2N-F-F-V-OMe, etc. exhibits self-assembly-driven absorbance, fluorescence, photocurrent, and electronic properties. Noncovalent PT-peptide conjugates produced via ionic, H-bonding, and π-stacking interactions show tunable morphology and optoelectronic properties by varying the composition of a component. PT conjugated with Alzheimer's disease peptide (KLVFFAE, Aβ16-22) shows enhanced photocatalytic water splitting, cationic PT(CPT-I)-perylene bisimide-appended dipeptide (PBI-DY), and anionic PT-perylene diimide-appended cationic peptide (PBI-NH3+) conjugates and exhibits self-assembly-driven enhanced photoswitching and organic mixed electronic and ionic conductivity (OMEIC) properties. In the PT-polymer conjugates, self-assembly-driven optoelectronic properties of covalently produced PT-random copolymers, PT-block copolymers, PT-graft-random copolymers, and PT-graft-block copolymer conjugates are discussed. The HOMO-LUMO levels of hyperbranched polymers are optimized to obtain better power conversion efficiency (PCE) in the bulk heterojunction (BHJ) solar cell than in linear polymers, and P3TAA-ran-P3HT (43 mol % P3TAA) conjugated with MAPbI3 perovskite exhibits higher PCE (10%) than that with only P3TAA hole-transporting material. In the ampholytic polythiophene (APT), on increasing pH, the morphology changes from the vesicle to fibrillar network for the dethreading of the PT chain, resulting in a red shift of the absorbance peak, an enormous increase in PL intensity, lowering of the charge transfer resistance, and an induction of Warburg impedance for the release of quencher I- ions. The PT-g-(PDMAEMA-co-PGLU-HEM) graft copolymer self-assembles with Con-A lectin, causing fluorescence quenching, and acts as a sensor for Con-A with a LOD of 57 mg/L. Varying sequences of the block copolymer containing pH-responsive PDMAEMA and temperature-responsive PDEGMEM grafted to the PT backbone shows different self-assembly, optical, electronic, and photocurrent properties depending on the proximity and preponderance of the block sequence on the PT backbone.

Photocatalytic degradation of methylene blue under visible light by cobalt ferrite nanoparticles/graphene quantum dots

A simple approach was developed to synthesize cobalt ferrite nanoparticles/graphene quantum dots (CF/GQDs). The material was prepared from a homogeneous mixture of iron nitrate, cobalt nitrate, and starch at 140, 180 and 200 °C in a 24 h thermal hydrolysis process. The obtained materials were characterised by using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet–visible diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, vibrating-sample magnetometry, and nitrogen adsorption/desorption isotherms. Cobalt ferrite crystals of around 8–10 nm and graphene quantum dots formed directly at 200 °C. Stacking GQDs sheets onto the CF nanoparticles resulted in CF/GQDs nanoparticles. The nanocomposite exhibits satisfactory fluorescent and superparamagnetic properties, which are vital for catalytic applications. The CF/GQDs catalyse significantly the degradation of methylene blue (MB) under visible light. The catalyst can be recycled with an external magnetic field and displays suitable stability. Also, it was reused in three successive experiments with a loss of efficiency of about 5%. The CF/GQDs are considered as an efficient photocatalyst for MB degradation and other dyes.

Photorewriting, Time-Resolved Encryption, and Unclonable Anticounterfeiting with Artificial Intelligence Authentication via a Reversible Photoswitchable System.

In the fields of photolithographic patterning, optical anticounterfeiting, and information encryption, reversible photochromic materials with solid-state fluorescence are emerging as a potential class of systems. A design strategy for reversible photochromic materials has been proposed and synthesized through the introduction of photoactive thiophene groups into the molecular backbone of aryl vinyls, compounds with unique aggregation-induced emission properties, and solid-state reversible photocontrollable fluorescence and color-changing properties. This work develops novel photochromic inks, films, and cellulose hydrogels for enhancing the security of information encryption and anticounterfeiting technologies. They achieve rapid and reversible color change under ultraviolet light irradiation. Dependent upon the rate of color change, higher levels of time-resolved security can be achieved. This feature is important for enhancing the confidentiality of encrypted information and the reliability of security labels. Color-changing cellulose hydrogels, inks, and films consisting of three photochromic fluorescent molecules have quick photoactivity, great photoreversibility and photostability, and good processability, making them ideal for time-delayed anticounterfeiting and smart encryption. Furthermore, specialized algorithms are used to construct convolutional neural networks, and image analysis is performed on these systems, thus solving the current problem of the time-consuming information decryption process. This artificial intelligence method offers new opportunities for enhanced data encryption.

Performance evaluation of carbon quantum dots impregnated glass ionomer cement to avoid peri-implant disease

Dental cement residues exacerbate peri-implant tissue irritation and peri-implantitis. The present study aims to evaluate the cytotoxicity, physiochemical, optical, and rheological properties of carbon quantum dots (CQDs) impregnated glass ionomer cement (GIC). Surface passivated fluorescent CQDs were synthesized using citric acid via thermal decomposition and blended with GIC. Characterization studies and rheological measurements were made to evaluate their performance. 3D-printed dental implant models cemented with GIC and GIC-CQD were compared to analyze excess cement residues. MTT assay was performed with human dental pulp stem cells (hDPSCs) and statistically analyzed using ANOVA and Tukey’s test. CQDs with a particle dimension of ∼2 nm were synthesized. The amorphous property of GIC-CQD was confirmed through XRD. The fluorescence properties of GIC-CQD showed three times higher emission intensity than conventional GIC. GIC-CQD attained maturation with a setting time extended by 64 s than GIC. Cement residue of size 2 mm was detected with a UV light excitation at a distance between 5 to 10 cm. Biocompatibility at 0.125 mg ml−1 dilution concentrations of GIC-CQD showed viability greater than 80% to hDPSCs. For the first time, we report that CQDs-impregnated GIC is a unique and cost-effective strategy for in-situ detection of excess cement rapidly using a hand-held device. A novel in-situ rapid detection method enables the dentist to identify residual cement of size less than 2 mm during the implantation. Therefore, GIC-CQD would replace conventional GIC and help in the prevention of peri-implant diseases.

Near pure white light emission of CeO2-Dy2O3 co-doped K2O–MgO–B2O3–P2O5 glasses and glass-ceramics

In this paper, the Ce3+/Dy3+ co-doped K2O–MgO–B2O3–P2O5 glasses (KMBP system) were produced, and the glass-ceramics (GC) were obtained by thermal treatment. The structure and fluorescent characteristics of the glasses and GC were analyzed by structural characterization, Judd-Ofelt (J-O) theory and photoluminescence spectra. Thermal analysis revealed that the KMBP system exhibited a stronger crystallization ability. The J-O parameters of the as-prepared glasses were found to all obey the order as Ω2 > Ω4 > Ω6. Spectral analysis showed that the glass doped with 0.5Ce3+/0.2Dy3+ rendered the nearly pure white light emission and featured a near-zero color purity of 1.23% as well as a correlated color temperature of 5071 K near that of daylight, standard white light and commercial WLEDs. The energy between Ce3+ and Dy3+ ions was transferred dominantly through dipole-dipole interactions, as determined by the Inokuti-Hirayama model. Additionally, the GC sample obtained from the parent glasses nucleated at 520 °C for 1 h and then crystallized at 590 °C for 0.5 h showed the optimal fluorescent properties. The higher activation energy Ea (0.302 eV) value of the GC sample implied that the Ce3+/Dy3+ co-doped KMBP glass-ceramics possessed stronger fluorescent thermostability. This indicates the potential of the as-prepared glass-ceramics for WLEDs.

Combining Diamond™ Nucleic Acid Dye with cyanoacrylate fuming for detection of fingermarks and visualising latent DNA

ABSTRACT Detection and identification of both fingermarks and latent DNA are common practices in forensic science, aiming to obtain crucial identification evidence in various types of criminal investigations. This study seeks to enhance cross-disciplinary research by combining important aspects of fingermark detection and recovery with evolving techniques for latent DNA detection. The goal is to produce fingermarks suitable for comparison that, when observed under the correct conditions, can utilize the fluorescent properties of the Diamond™ Nucleic Acid Dye to provide information on usability for DNA analysis. This preliminary research specifically focused on determining the most effective combination of Diamond™ Dye with cyanoacrylate fuming. The research demonstrated that pre-treatment of the fingermark before cyanoacrylate fuming could produce suitable fingermarks with observable friction ridge details, while simultaneously allowing for the visualization of DNA.

Study on the Mechanism of Exogenous 5-Aminolevulinic Acid (ALA) in Regulating the Photosynthetic Efficiency of Pear Leaves

To provide a theoretical basis for the application of ALA in pear production, the effects of exogenous 5-aminolevulinic acid (ALA) treatment on leaf photosynthetic gas exchange parameters, chlorophyll fast fluorescence properties, and relative expression of the related genes were investigated using pear (Pyrus pyrifolia Nakai cv. ‘Whasan’) as a material in the study. The results show that exogenous ALA treatment improved the photosynthetic gas exchange parameters of pear leaves, upregulated the expression of multiple key genes which are related to ALA biosynthesis, metabolism, and transformation into chlorophylls. GUS staining in tobacco leaves showed that exogenous ALA activated the promoter activity of PypHEMA and PypCHLH genes, implying that the synthesis of endogenous ALA and chlorophylls was promoted by exogenous ALA. Furthermore, ALA promoted the expression of the genes encoding photosystem II (PSII) reaction center proteins, such as core protein D1, inner light-harvesting pigment proteins CP43 and CP47, and cytochrome b559. This led to increased PSII reaction center activity. In addition, ALA alleviated the donor side oxygen-evolving complex inhibition and reduced the closure rate on the receptor side, allowing for increased photochemical electron transfer and reduced heat dissipation while improving the photosynthetic performance index PIabs and PItotal. The findings of this study contribute to a better understanding of ALA’s promotion of plant photosynthetic efficiency, providing valuable insights for further research and potential applications in pear production.

Pyrrole-substituted difluoroboron β-diketonate dyes: Facile synthesis and multi-state optical properties

Difluoroboron β-diketonate complexes (BF2bdks) are classic fluorescent molecules that have been applied in luminescent materials, oxygen and mechanical sensors, and most investigations concentrate on BF2bdks with varying aromatic groups without heteroatoms. In this work, a new molecular platform BF2bdks with heterocycle-substituted is prepared in one pot, and six unsymmetric π-expanded BF2bdks are synthesized via condensation reaction. B-1∼6 exhibit comparable fluorescence properties in solution, aggregated and solid states. B-3 (683 nm, Φf = 13.1 %) and B-5 (700 nm, Φf = 2.1 %) show near infra-red (NIR) emission with moderate fluorescence intensity in solution state. Solid emission of B, B-1-3 and B-5 are detected with fluorescence quantum yield from 12.8 % to 25.6 %, and B-2, B-3 and B-5 show AIE phenomenon in aggregated state. The results are supported by crystal analysis and DFT calculation in some extent. In a word, this work enriches the heterocycle-substituted BF2bdks system. B-3 and B-5 with moderate intensity NIR emission in solution, aggregated and solid states at the same time, providing a simple preparation method for multi-states luminescent dyes.